| Model number |
GL-PMG-7500 Horizontal |
GL-PMG-7500 Vertical |
| Rated rotation speed |
200 RPM, 250 RPM |
| Rated output power |
7.5 kW at 200 RPM, 10 kW at 250 RPM |
| Shaft bearing |
High standard NSK 6213DDU
(Front) NSK 6313DDU (Rear) |
| Weight(Kgs) |
175 |
170 |
| Rotor inertia (Kg.m2) |
0.210 |
| Fasteners (nuts and bolts) |
High standard Stainless Steel |
| Lamination stack |
High specification cold-rolled Steel |
| Windings temperature rating |
180 degrees Celsius |
| Magnet material |
NdFeB (Neodymium Iron Boron) |
| Magnets temperature |
Rated at 150 degree Celsius |
| Generator configuration |
3 Phase star connected AC output or rectifier DC output |
| Safety |
Capable of withstand short term shorting of the windings for braking effect at rated rotation speed. Class 1 electrical safety rated for prevention of |
| Starting torque(NM) |
<5.9 |
| Phase resistance(ohms) |
2.1 |
Recified DC Current at
Rated Output |
15.6 A, 16.5 A |
| Requied Torque at Rated Power |
382 NM, 392 NM |
| Output Wire Square Section(mm2) |
6 |
| Output Wire Length(mm) |
100 |
700 |
| Download: |
|
|
